VOLVO
ECM-P054C00 - Cold Start Exhaust (B) Camshaft Position Timing Over-Advanced (Bank 2). General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
2 modellerS80 (2007–), XC90 (2003–)
Vis modeller per årsmodell og motor (2)
Hva betyr feilkoden?
The exhaust camshaft (B) on bank 2 is controlled by the ECM during warm-up after a cold start. The code is set when the camshaft angle sits too far forward compared with the requested position. Poor oil quality, low oil pressure, or a damaged control valve or VVT unit may be behind it.
Mulige årsaker
- Poor engine oil quality
- Low oil pressure
- Damaged camshaft control valve
- Damaged VVT unit
Hva du kan gjøre
- 1Check the quality of the engine oil and that it is clean
- 2Have a workshop check the engine oil pressure
- 3If you have a diagnostic tool, read the exhaust camshaft position for bank 2 in live data during warm-up and compare it with the requested position
- 4Clear the code and road test the car with the engine cold to see whether it returns
- 5If the code returns, have a workshop with diagnostic equipment check the control valve and the VVT unit on bank 2
Symptomer du kan merke2
- Uneven idle
- The engine misfires
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.