Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P055600
    VOLVO

    ECM-P055600 - Brake Booster Pressure Sensor Circuit Range/Performance. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
    • Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo S60 (2011–)2011–2015Kun motor: D4162T
    • Volvo S80 (2007–)2012–2015Kun motor: D4162T
    • Volvo V40 (2013–)2013–2015Kun motor: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
    • Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo V60 (2011–)2011–2015Kun motor: D4162T
    • Volvo V70 (2008–)2012–2015Kun motor: D4162T

    Hva betyr feilkoden?

    The ECM monitors the vacuum pressure sensor, which measures the negative pressure in the brake booster. If the vacuum is too low while driving, automatic engine start/stop is not allowed. The fault may be a loose or oxidized connector, or a damaged sensor.

    Mulige årsaker

    • Loose or oxidized connector contact
    • Damaged vacuum pressure sensor

    Hva du kan gjøre

    1. 1Check that the vacuum pressure sensor connector is secure and not oxidized
    2. 2Check that the hose between the engine and the brake booster is secure and not kinked or damaged
    3. 3If you have a diagnostic tool, read the vacuum pressure in live data with the engine running and see whether the value is steady
    4. 4Clear the code and start the engine to see whether it returns
    5. 5Do not work on the brake booster yourself; if the fault returns, have a workshop check the vacuum pressure sensor with diagnostic equipment

    Symptomer du kan merke1

    • Automatic engine start/stop does not work, both while driving and at idle

    Hva feilen kan påvirke2

    • The module uses a vacuum value that corresponds to no vacuum
    • Automatic engine start/stop is switched off

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.