Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P055D00
    VOLVO

    ECM-P055D00 - Engine Oil Pressure Sensor/Switch "B" Circuit High. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
    • Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
    • Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5

    Hva betyr feilkoden?

    The ECM reads oil pressure through the combined oil pressure and oil temperature sensor. The fault is stored when the signal from the oil pressure sensor is too high while the engine is running. The module then uses a fixed oil pressure value instead of the measured one.

    Mulige årsaker

    • The signal wire is shorted to supply voltage
    • The combined oil pressure and oil temperature sensor is damaged

    Hva du kan gjøre

    1. 1Check that the fuses are intact
    2. 2Look for chafed wiring from the sensor that may have touched a live supply part
    3. 3Use a multimeter to check that the signal wire from the sensor has no voltage when the ignition is off
    4. 4If you have diagnostic equipment: read the oil pressure in live data with the engine running and see whether the value sits at an unrealistically high level
    5. 5If the wiring and connector are sound, have a workshop check the combined sensor

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Hva feilen kan påvirke1

    • The control module uses a fixed oil pressure instead of the measured value

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.