Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P055F00
    VOLVO

    ECM-P055F00 - Engine Oil Pressure Out of Range. General Failure Information. No sub type information

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    8 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, D4204T5
    • Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
    • Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
    • Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo V70 (2008–)2014–2015Kun motor: B4204T11, D4204T5
    • Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, D4204T5
    • Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, D4204T5

    Hva betyr feilkoden?

    The ECM checks oil pressure with the combined oil pressure and oil temperature sensor. The fault is stored when the module finds that the signal from the sensor is faulty while the engine is running. A fixed oil pressure value is then used instead of the measured one, and the fault may be linked to the oil quality.

    Mulige årsaker

    • The combined oil pressure and oil temperature sensor is damaged
    • The engine oil is of poor quality

    Hva du kan gjøre

    1. 1Check that the fuses are intact
    2. 2Check the condition of the oil and which oil quality has been added, as poor oil can be the cause
    3. 3Check the connector at the sensor for contact resistance and oxidation
    4. 4If you have diagnostic equipment: read the oil pressure in live data with the engine running and see whether the value behaves abnormally
    5. 5If the oil is in good condition and the connector is clean, have a workshop check the combined sensor

    Symptomer du kan merke1

    • No noticeable symptoms for the driver

    Hva feilen kan påvirke1

    • The control module uses a fixed oil pressure instead of the measured value

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.