VOLVO
ECM-P056400 - Cruise Control Multi-Function Input "A" Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The CEM reads the steering wheel buttons for the cruise control and passes the information to the ECM over CAN. The code is set when the CEM has detected a fault, and then the fault information is also sent to the engine control module.
Mulige årsaker
- The fault may lie in the central electronics module (CEM)
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Test the cruise control buttons on the steering wheel: check that they spring back and do not stick
- 3If you have diagnostic equipment: read the fault codes in the central electronics module (CEM) and deal with them first
- 4If none of the checks show anything, have a workshop look for the fault in the central electronics module (CEM)
Symptomer du kan merke2
- Cruise control does not engage
- Cruise control does not hold the set speed and disengages
Hva feilen kan påvirke1
- Cruise control is switched off while the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.