Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P056482
    VOLVO

    ECM-P056482 - Cruise Control Multi-Function Input "A" Circuit. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    9 modeller

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Vis modeller per årsmodell og motor (9)
    • Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
    • Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo S60 (2011–)2011–2015Kun motor: D4162T
    • Volvo S80 (2007–)2012–2015Kun motor: D4162T
    • Volvo V40 (2013–)2013–2015Kun motor: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
    • Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
    • Volvo V60 (2011–)2011–2015Kun motor: D4162T
    • Volvo V70 (2008–)2012–2015Kun motor: D4162T

    Hva betyr feilkoden?

    The ECM receives the information about the cruise control buttons from the central electronics module (CEM) over CAN and checks that it is reasonable. Each message should carry a sequence number that counts up, and here the number does not match. The code is set when the information from the CEM is faulty or unreasonable.

    Mulige årsaker

    • The fault may lie in the central electronics module (CEM)

    Hva du kan gjøre

    1. 1Check that the fuses are intact
    2. 2If you have diagnostic equipment: read the fault codes in the central electronics module (CEM) and deal with them first
    3. 3Test the cruise control buttons on the steering wheel and check that they spring back and do not stick
    4. 4Check that the connectors to the central electronics module (CEM) are firmly seated and not corroded
    5. 5If none of the checks shows anything, have a workshop look for the fault in the central electronics module (CEM)

    Symptomer du kan merke2

    • Cruise control does not engage
    • Cruise control does not hold the set speed and disengages

    Hva feilen kan påvirke1

    • Cruise control is switched off while the fault is active

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.