VOLVO
ECM-P056800 - Cruise Control SET Signal. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2009Kun motor: D5244T10
- Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2009Kun motor: D5244T10
- Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
Hva betyr feilkoden?
The ECM monitors the cruise control function. The fault is stored when the signal used to set the speed from the cruise control button panel is faulty while the engine is running. The cruise control function is then switched off.
Mulige årsaker
- A cruise control button or buttons have stuck
- Faulty signal from the cruise control button panel
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Press the cruise control buttons on the steering wheel a few times and check that they return fully
- 3Check that the connector to the button panel is firmly seated and not corroded
- 4If you have diagnostic equipment: read the status of the set signal in live data and check that it changes when the button is pressed and released
- 5If the button panel and connector are in order, have a workshop check the cruise control button panel
Symptomer du kan merke1
- Cruise control does not engage
Hva feilen kan påvirke1
- The cruise control function is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.