VOLVO
ECM-P056900 - Cruise Control COAST Signal. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
4 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2009Kun motor: D5244T10
- Volvo S80 (2007–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2009Kun motor: D5244T10
- Volvo V70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T19
- Volvo XC60 (2009–)2010Kun motor: D5244T10, D5244T14, D5244T16
- Volvo XC70 (2008–)2010Kun motor: D5244T10, D5244T14, D5244T16
Hva betyr feilkoden?
The ECM monitors the cruise control function. The fault is stored when the information from the cruise control button panel is faulty, or when an excessive torque is requested. The function is then switched off.
Mulige årsaker
- CAN fault on the signal between the ECM and the lever assembly
- Internal fault in the ECM itself
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Check that the cruise control button panel is not damaged or sticking
- 3If you have diagnostic equipment: read the coast signal in live data and check that it changes when the coast button is used
- 4Check that the connectors at the lever assembly and the engine control module are firmly seated and not corroded
- 5If the connectors and button panel are in order, have a workshop check the CAN signal and the engine control module (ECM)
Symptomer du kan merke1
- Cruise control does not engage
Hva feilen kan påvirke1
- The cruise control function is switched off
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.