VOLVO
ECM-P057000 - Cruise Control ACCEL Signal. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM checks the internal functions of the cruise control. If the module finds serious faults in the cruise control function, the code is set and the cruise control is switched off. The code is checked while the engine is running.
Mulige årsaker
- Contact resistance or oxidation in the connector blades
- Fault in the CAN network
Hva du kan gjøre
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the diagnostic status and fault status for the code with the engine running and see whether the fault is still active
- 3Check the connector blades belonging to the cruise control for contact resistance and oxidation
- 4Clear the code and road test the car to see whether it returns
- 5If the fault returns, have a workshop check the CAN network and the cruise control function
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The cruise control function does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.