VOLVO
ECM-P057500 - Cruise Control Input Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
14 modellerC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (41)
- Volvo C30 (2007–2013)2011–2013Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2011Kun motor: D5204T, D5204T5
- Volvo C70 (2006–2013)2012–2013Alle motorer unntatt: B5254T7
- Volvo S40 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo S60 (2011–)2011Kun motor: B6304T4, D5204T2, D5244T10
- Volvo S60 (2011–)2012Kun motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T
- Volvo S80 (2007–)2007Kun motor: B6324S, B8444S
- Volvo S80 (2007–)2008Kun motor: B6304T2, B6324S, B8444S
- Volvo S80 (2007–)2009Kun motor: B6304T2, B6324S, B8444S, D5244T10
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2, B8444S, D5244T10, D5244T14, D5244T19
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S, D5204T2, D5244T10
- Volvo S80 (2007–)2012Kun motor: B6304T4, B6324S4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7, D4162T
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D4162T
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3, D4162T
- Volvo V40 (2013–)2014–2015Alle motorer unntatt: B4164T, B4164T3, B4164T4, D4162T
- Volvo V40 Cross Country (2013–)2013–2015Alle motorer unntatt: B4164T, D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D5204T, D5204T5
- Volvo V60 (2011–)2011Kun motor: B6304T4, D5204T2, D5244T10
- Volvo V60 (2011–)2012Kun motor: B6304T4, D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013–2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D4162T
- Volvo V60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D4162T
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2009Kun motor: B6304T2, B6324S, D5244T10
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2, D5244T10, D5244T14, D5244T19
- Volvo V70 (2008–)2011Kun motor: B6304T4, B6324S5, D5204T2, D5244T10
- Volvo V70 (2008–)2012Kun motor: B6304T4, B6324S5, D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013–2014Alle motorer unntatt: B4164T, B4164T2, B4204T7, D4162T
- Volvo V70 (2008–)2015Alle motorer unntatt: B4164T, B4164T2, D4162T
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Alle motorer unntatt: B4204T6
- Volvo XC60 (2009–)2011–2012Alle motorer unntatt: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Alle motorer unntatt: B4204T7
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010–2015
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The CEM reads the cruise control buttons on the steering wheel and passes the signals to the ECM over CAN. The code is set when the information shows that one of the buttons has been held pressed for too long, and the button is then treated as stuck.
Mulige årsaker
- One or more cruise control buttons have stuck in the pressed position
- Damaged steering wheel button assembly
- Faulty signal from the cruise control button panel
- The fault may lie in the central electronics module (CEM) or the steering angle sensor control module (SAS)
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Look at the cruise control buttons on the steering wheel and check that none is held in the pressed position
- 3If you have diagnostic equipment: read the CEM fault codes and deal with them first, then clear this code
- 4If you have diagnostic equipment: read the button status in live data and check that the status returns when the button is released
- 5Check that the connectors to the steering wheel button assembly and to the steering angle sensor are firmly seated and not corroded
- 6If the above shows nothing, have a workshop look for the fault in the central electronics module (CEM) or the steering angle sensor control module (SAS)
Symptomer du kan merke2
- Cruise control does not work at all
- Cruise control does not engage
Hva feilen kan påvirke3
- Cruise control is switched off while the fault is active
- Cruise control cannot be activated
- The speed limiter is not available
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.