VOLVO
ECM-P057502 - Cruise Control Input Circuit. General Failure Information. General signal failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
This is a signal fault in the cruise control input circuit. The engine control module (ECM) runs its own checks on the cruise control function while the engine is running, and for serious faults the code is set and the cruise control is switched off.
Mulige årsaker
- Contact resistance or oxidation in connectors
- Fault in the CAN network
Hva du kan gjøre
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is still active
- 3Check the connectors in the cruise control circuit for contact resistance and oxidation
- 4Clear the code and road test the car. Does it come back?
- 5If the fault returns, have a workshop check the CAN network
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The cruise control function does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.