VOLVO
ECM-P057800 - Cruise Control Multi-Function Input A Circuit Stuck. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM receives cruise control information from several other control modules over CAN, including the buttons on the steering wheel. The code is set when the ECM receives a CAN message reporting a fault in the cruise control buttons. The fault can be checked when any of the buttons is used while driving.
Mulige årsaker
- A sticking or locked cruise control button
- The message from the cruise control buttons has a wrong checksum
- Damaged cruise control button assembly
- Several buttons activated at the same time
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Press the cruise control buttons on the steering wheel one at a time and check that they return fully and do not stick
- 3If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is still active after using the buttons on a safe test drive
- 4Clear the code and road test the car. Check whether it returns when the cruise control buttons are used
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.