VOLVO
ECM-P057982 - Cruise Control Multi-Function Input A Circuit Range/Performance. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM receives cruise control information over CAN from several control modules, including the buttons on the steering wheel. The fault concerns a counter in the message that is not correct or is not being updated. The code is set when a CAN message reporting a fault in the cruise control buttons arrives.
Mulige årsaker
- A sticking or locked cruise control button
- The message from the cruise control buttons has a wrong checksum
- Damaged cruise control button assembly
- Several buttons activated at the same time
Hva du kan gjøre
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is active after a safe test drive using the buttons
- 3Press one cruise control button at a time and check that it returns fully
- 4Check that the connectors to the steering wheel button assembly are firmly seated and not corroded
- 5Clear the code and road test the car to see whether it returns
- 6If the fault remains, have a workshop check the cruise control button assembly and the CAN network
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.