VOLVO
ECM-P058100 - Cruise Control Multi-Function Input A Circuit High. Bus Signal / Message Failures. Invalid serial data received
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM monitors the cruise control function internally. The code concerns invalid data for the cruise control input, and for serious faults the cruise control is switched off. The code is tested while the engine is running.
Mulige årsaker
- Contact resistance or oxidation in the connector blades
- Fault in the CAN network
Hva du kan gjøre
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault status with the engine running and see whether the fault is still active
- 3Look at the connectors in the cruise control circuit and check for contact resistance and oxidation
- 4Clear the code and road test the car to see whether it returns
- 5If the fault returns, have a workshop check the CAN network
Symptomer du kan merke1
- No noticeable symptoms for the driver
Hva feilen kan påvirke1
- The cruise control function does not work
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.