VOLVO
ECM-P058981 - Cruise Control Multi-Function Input B Circuit. Bus Signal / Message Failures. Invalid serial data received
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM receives cruise control information over CAN from several control modules. The code is set when a CAN message about the cruise control from the front monitoring module (FSM) or the central electronics module (CEM) is faulty. It is checked while driving with the cruise control activated.
Mulige årsaker
- Contact resistance or oxidation in the connector blades
- Fault in the CAN network
Hva du kan gjøre
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the fault status during a safe test drive with the cruise control switched on and see whether the fault is active
- 3Check the connectors in the cruise control circuit for contact resistance and oxidation
- 4Clear the code and road test the car with the cruise control switched on, to see whether it returns
- 5If the fault remains, have a workshop check the CAN network
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.