VOLVO
ECM-P058982 - Cruise Control Multi-Function Input B Circuit. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
A CAN message about the cruise control from the FSM or the CEM has a sequence counter that is not correct or is not being updated, and then the ECM sets the code. The code is checked while driving with the cruise control activated.
Mulige årsaker
- Contact resistance or oxidation in the connector blades
- Fault in the CAN network
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Read the fault status during a safe test drive with the cruise control switched on and see whether the fault is still active
- 3Look at the connectors in the cruise control circuit for contact resistance and oxidation
- 4Check that the connectors on the CAN network are firmly seated and undamaged
- 5Clear the code and road test the car to see whether it returns
- 6If the fault remains, have a workshop look for it in the CAN network
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.