VOLVO
ECM-P058983 - Cruise Control Multi-Function Input B Circuit. Bus Signal / Message Failures. Value of signal protection calculation incorrect
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
A CAN message about the cruise control from the FSM or the CEM has a checksum that does not match, and then the ECM sets the code. The code is checked while driving with the cruise control activated.
Mulige årsaker
- Contact resistance or oxidation in the connector blades
- Fault in the CAN network
Hva du kan gjøre
- 1Check that the fuses are intact
- 2If you have diagnostic equipment: read the diagnostic status and fault status for the code after a safe test drive
- 3Check that the connections in the CAN network to the FSM and CEM are firmly seated and not loose
- 4Clear the code and road test the car with the cruise control switched on, to see whether it returns
- 5If the fault returns, have a workshop check the CAN network
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.