Hva betyr feilkode ECM-P058D00?

Diagnose og feilkodedefinisjon for ECM-P058D00 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Bestill reparasjon hos OBD Tuning.

VOLVO

ECM-P058D00 - Battery Monitor Module Voltage Monitoring Performance. General Failure Information. No sub type information

System

Motorstyring (ECM)

Volvo-modeller feilkoden gjelder for

Gjelder følgende modeller:

8 modeller

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Vis modeller per årsmodell og motor (8)

Hva betyr feilkoden?

Although the code is named battery monitor module, it concerns the 12-volt supply to the engine control module (ECM). The supply is checked at ignition switch-on, and the code is set if the supply voltage is missing.

Mulige årsaker

Damaged fuse for the voltage supply
Open circuit in the voltage wire

Hva du kan gjøre

1Check that the fuse for the voltage supply to the engine control module is intact
2Check the battery terminals and connections for contact resistance and oxidation
3Use a multimeter to check that the voltage wire to the engine control module has voltage when the ignition is on
4Check the wire running from the ECM to the battery for breaks, contact resistance and oxidation
5Clear the code and road test the car to see whether it returns
6If the fault remains, have a workshop check the wiring and the supply to the engine control module

Symptomer du kan merke3

The check engine lamp lights or behaves abnormally
The battery shows low voltage
The battery is flat

Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.