VOLVO
ECM-P059800 - Thermostat Heater Control Circuit Low. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Kun motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
Hva betyr feilkoden?
The ECM checks the thermostat. The code is set when the voltage on the signal wire from the thermostat is too low, and the check is made with the ignition on.
Mulige årsaker
- Contact resistance or oxidation in connections
- The signal wire to the thermostat is shorted to ground
- Damaged thermostat
Hva du kan gjøre
- 1Check that the fuses are intact
- 2Check the connectors at the thermostat and the control module for contact resistance and oxidation
- 3Use a multimeter to check that the signal wire is not shorted to ground
- 4Clear the code and road test the car, then see whether it returns
- 5If the fault remains, have a workshop check the thermostat
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.