VOLVO
ECM-P060600 - Control module processor. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
11 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (17)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2013Kun motor: D4162T
- Volvo S60 (2011–)2014–2015Kun motor: D4162T, D4204T5
- Volvo S80 (2007–)2012–2013Kun motor: D4162T
- Volvo S80 (2007–)2014–2015Kun motor: D4162T, D4204T5
- Volvo V40 (2013–)2013–2014Kun motor: D4162T
- Volvo V40 (2013–)2015Kun motor: D4162T, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2015Kun motor: D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2013Kun motor: D4162T
- Volvo V60 (2011–)2014–2015Kun motor: D4162T, D4204T5
- Volvo V70 (2008–)2012–2013Kun motor: D4162T
- Volvo V70 (2008–)2014–2015Kun motor: D4162T, D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The ECM keeps checking a number of internal signals by calculating them and comparing them with one another, so the module stays reliable in use. The code is set when the internal checks give results that are not allowed, and
Mulige årsaker
- Damaged engine control module (ECM)
- Poorly charged battery or corroded connecting leads
- Software in the ECM has been damaged
Hva du kan gjøre
- 1Check the battery terminals and connections for corrosion and loose contacts
- 2If you have diagnostic equipment: read the code status after the module's internal test has been run
- 3Clear the code and road test the car to see whether it returns
- 4If the fault returns, have a workshop check the control module software and reload it if needed
- 5If the fault remains, have a workshop replace the engine control module (ECM)
Symptomer du kan merke4
- The check engine lamp lights or behaves abnormally
- The engine performs poorly and lacks power
- The engine hesitates, surges or runs jerkily, hard to tell when it happens
- Text message and warning symbol in the display
Hva feilen kan påvirke1
- Some internal signals in the engine control module are replaced with standard values
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.