VOLVO
ECM-P060645 - ECM / PCM Processor. System Internal Failures. Program memory failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The ECM has recorded a fault in its program memory. The fault concerns the internal reset function, which the module checks all the time. The code is checked when the ignition is switched on and is set while the fault is present.
Mulige årsaker
- Faulty software in the ECM
- Damaged ECM
Hva du kan gjøre
- 1Read and note the code, clear it and road test the car to see whether it comes back
- 2Check that the battery is charged and that the battery terminals and earth connections are clean and tight
- 3Check that the fuses for engine management are intact
- 4If the code comes back, have a workshop with diagnostic equipment reload the software in the ECM. If that does not help, the module needs replacing
Symptomer du kan merke4
- Malfunction indicator lamp (MIL) comes on
- Malfunction indicator lamp flashes
- The engine stalls
- Starter motor turns, yet the engine fails to start
Hva feilen kan påvirke1
- The ECM tries to restart itself (reset)
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.