VOLVO
ECM-P060668 - Control module processor. Algorithm Based Failures. Event information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The code is event-driven, which means it is an information code and does not show a fault in the ECM. It is set when the module's internal checks give impermissible results with the engine running. The code does not need repairing, but if driving problems remain after clearing it they should be followed up.
Mulige årsaker
- No fault that needs repairing lies behind the code
Hva du kan gjøre
- 1Read the code with the engine at idle and note whether it is active right now
- 2Check that the battery is charged and that the battery terminals and earth connections are tight and clean
- 3Clear the code and road test the car
- 4If the driving problems remain, have a workshop reload the software in the ECM. Replace the module only if that does not help
Symptomer du kan merke3
- The engine runs poorly and lacks power
- The engine hesitates, surges or runs roughly during acceleration or deceleration
- The engine hesitates, surges or runs roughly at constant speed
Hva feilen kan påvirke1
- Some internal signals in the ECM are replaced by default values
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.