VOLVO
ECM-P060741 - Control Module Performance. System Internal Failures. General checksum failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (22)
- Volvo S60 (2011–)2011–2014Kun motor: B6304T4
- Volvo S60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Kun motor: B6324S
- Volvo S80 (2007–)2008–2009Kun motor: B6304T2, B6324S
- Volvo S80 (2007–)2010Kun motor: B6304T2, B6324S, B6324S2, B8444S
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5, B8444S
- Volvo S80 (2007–)2012–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo V60 (2011–)2011–2014Kun motor: B6304T4
- Volvo V60 (2011–)2015Kun motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Kun motor: B6304T2, B6324S
- Volvo V70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo V70 (2008–)2011–2014Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2015Kun motor: B6304T4
- Volvo XC60 (2009–)2009Kun motor: B6304T2
- Volvo XC60 (2009–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC60 (2009–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2008Kun motor: B6324S
- Volvo XC70 (2008–)2009Kun motor: B6304T2, B6324S
- Volvo XC70 (2008–)2010Kun motor: B6304T2, B6324S, B6324S2
- Volvo XC70 (2008–)2011–2015Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC90 (2003–)2007–2010Kun motor: B6324S
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The ECM has recorded an internal fault in a checksum, meaning the check that shows whether the software or data is unchanged. Common causes are a weak battery, corroded connections, damaged software or a damaged module.
Mulige årsaker
- Poorly charged battery or corroded connection cables
- Damaged software in the ECM
- Damaged ECM
Hva du kan gjøre
- 1Read the code with the ignition on and note whether it is active right now
- 2Check that the battery is fully charged and that the battery terminals and earth connections are tight and clean
- 3Check that the connectors at the ECM are tight and free from corrosion
- 4If the fault comes back, have a workshop reload the software in the ECM. If that does not help, the module needs replacing
Symptomer du kan merke2
- Malfunction indicator lamp comes on
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
Hva feilen kan påvirke1
- Some internal signals in the ECM are replaced by default values
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.