VOLVO
ECM-P060764 - Control Module Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM receives information from the brake control module (BCM) over the CAN network. The BCM can request reduced engine torque for a function in the system, and the code is set when such a request arrives at too low an engine speed. The code can only be detected while the stability system is active.
Mulige årsaker
- Fault on the CAN network
- Fault in the brake control module (BCM), where the cause should be looked for
Hva du kan gjøre
- 1Read the code, clear it and road test the car with the stability system active to see whether it comes back
- 2Check the battery charge and that the battery terminals and earth connections are tight and clean
- 3Check that the connectors at the brake control module are tight and free from corrosion
- 4The brake control module (BCM) is part of the braking system, so have a workshop check it and the CAN network if the fault comes back
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.