VOLVO
ECM-P060B00 - Internal Control Module A/D Processing Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
13 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (33)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2012Kun motor: B6304T4, D4162T
- Volvo S60 (2011–)2013Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4, D4162T
- Volvo S60 (2011–)2014Alle motorer unntatt: B4164T, B4164T2, B4164T3, B4204T7, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle motorer unntatt: B4164T, B4164T2, B4164T3, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2011Kun motor: B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2012Kun motor: B6304T4, B6324S4, B6324S5, D4162T
- Volvo S80 (2007–)2013Kun motor: B5254T12, B5254T14, B6304T4, B6324S4, B6324S5, D4162T
- Volvo S80 (2007–)2014Alle motorer unntatt: B4164T, B4164T2, B4204T6, B4204T7, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Alle motorer unntatt: B4164T, D5204T3, D5244T15
- Volvo V40 (2013–)2013Alle motorer unntatt: B4164T, B4164T3, D5204T4, D5204T6
- Volvo V40 (2013–)2014Kun motor: B5204T8, B5204T9, B5254T12, B5254T14, D4162T
- Volvo V40 (2013–)2015Alle motorer unntatt: B4164T, B4164T3, B4164T4, D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Alle motorer unntatt: B4164T, D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Alle motorer unntatt: B4164T, D5204T6
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2012Kun motor: B6304T4, D4162T
- Volvo V60 (2011–)2013Kun motor: B5204T8, B5204T9, B6304T4, D4162T
- Volvo V60 (2011–)2014Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4162T, D4204T5
- Volvo V60 (2011–)2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4162T, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2011Kun motor: B6304T4, B6324S5
- Volvo V70 (2008–)2012Kun motor: B6304T4, B6324S5, D4162T
- Volvo V70 (2008–)2013Kun motor: B5204T9, B6304T4, B6324S5, D4162T
- Volvo V70 (2008–)2014Kun motor: B4204T11, B5204T9, B6304T4, B6324S5, D4162T, D4204T5
- Volvo V70 (2008–)2015Kun motor: B4204T11, B5204T9, B6304T4, D4162T, D4204T5
- Volvo XC60 (2009–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Alle motorer unntatt: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Alle motorer unntatt: B4204T7, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2011–2013Kun motor: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11, B6304T4, B6324S4, B6324S5, D4204T5
- Volvo XC90 (2003–)2011–2014Kun motor: B6324S5
Hva betyr feilkoden?
The ECM has recorded a fault in its A/D processing, meaning the conversion of analogue signals into digital ones. The code does not state a more specific fault type. The cause may be faulty software or a damaged module.
Mulige årsaker
- Faulty software in the ECM
- Damaged ECM
Hva du kan gjøre
- 1Read the code with the ignition on and note whether it is active right now
- 2Check that the battery is charged and that the battery terminals and earth connections are tight
- 3If ECM-P060A00 is also stored at the same time, this points to a software fault
- 4In that case the module should not be replaced before the software has been checked. Have a workshop confirm that it has the latest software
- 5If the fault still comes back, have a workshop replace the engine control module
Symptomer du kan merke4
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
- Warning symbol and message in the display
- The car feels weak and lacks power
- The engine does not start, either always or only sometimes, or cranks without starting
Hva feilen kan påvirke1
- Engine torque is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.