VOLVO
ECM-P060C48 - Internal Control Module Main Processor Performance. System Internal Failures. Supervision software failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: D4204T5
- Volvo S80 (2007–)2014–2015Kun motor: D4204T5
- Volvo V40 (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11, D4204T14
- Volvo V60 (2011–)2014–2015Kun motor: D4204T5
- Volvo V70 (2008–)2014–2015Kun motor: D4204T5
- Volvo XC60 (2009–)2014–2015Kun motor: D4204T5
- Volvo XC70 (2008–)2014–2015Kun motor: D4204T5
Hva betyr feilkoden?
The code is event-driven, meaning it is an information code that does not show a fault in the ECM. It is set with the engine running, when the module's internal checks give impermissible results. It does not need repairing, but a warning message may appear in the display.
Mulige årsaker
- The code does not come from a fault that needs repairing
Hva du kan gjøre
- 1Clear the code if it appears again, since it does not need troubleshooting
- 2If you have a diagnostic tool: check that the code is no longer active after a road test
Symptomer du kan merke1
- Warning symbol and message in the display
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.