VOLVO
ECM-P060D47 - Internal Control Module Accelerator Pedal Position Performance. System Internal Failures. Watchdog / safety µC failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
Although the code is named watchdog, it concerns the two signals from the accelerator pedal. The ECM compares the analogue signal from the pedal with the PWM signal, and the code is set when the difference becomes too large. Engine power is limited while the fault is present.
Mulige årsaker
- Loose contact, contact resistance or oxidation in the connections to the pedal sensor
- Break in the earth wire or signal earth wire
- Fault in the PWM signal or the analogue signal from the pedal sensor
- Damaged accelerator pedal position sensor
- Damaged ECM
Hva du kan gjøre
- 1Read the code and note whether it is active right now
- 2If you have a diagnostic tool: compare the two pedal values in live data while pressing the pedal slowly down and releasing it
- 3Check that the connectors at the pedal and the ECM are tight and free from corrosion
- 4Check that the battery is charged and that the battery terminals and earth connections are tight
- 5If the fault comes back, have a workshop replace the pedal sensor if it is damaged
Symptomer du kan merke4
- The car feels weak and lacks power
- The engine hesitates, surges or runs roughly, sometimes or all the time
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
- Warning symbol and message in the display
Hva feilen kan påvirke1
- Engine power is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.