VOLVO
ECM-P060E00 - Internal Control Module Throttle Position Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The code is set when the module's normal engine control functions and its internal monitoring interpret the signals from the throttle position sensor differently. The fault concerns the throttle position and is a general one, without a more specific fault type.
Mulige årsaker
- Damaged ECM
Hva du kan gjøre
- 1If you have a diagnostic tool: follow the throttle position value in live data while the accelerator pedal is pressed and released. The value should change smoothly
- 2Check the battery charge and that the battery terminals and earth connections are tight and clean
- 3If the fault comes back, have a workshop replace the engine control module
Symptomer du kan merke4
- Maximum engine speed is lower than normal
- Cruise control does not work at all
- Idle is uneven
- Malfunction indicator lamp comes on
Hva feilen kan påvirke1
- Engine speed and torque are limited to a calculated reasonable value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.