VOLVO
ECM-P060E12 - Internal Control Module Throttle Position Performance. General Electrical Failures. Circuit short to battery
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The code concerns a short circuit to battery voltage, but it is set when the reading from the throttle unit's position sensor is too high or too low. The fault may lie in the supply, the signal wire, the earth wire or the throttle unit.
Mulige årsaker
- Supply shorted to battery voltage
- Signal wire shorted to voltage
- Break in the signal earth wire
- Damaged throttle unit
- If ECM-P060E11 is also stored: loose contact or oxidation in the connections, or a short to earth on the supply or signal wire
Hva du kan gjøre
- 1Read the code with the ignition on and see whether it is active right now
- 2If you have a multimeter: check that the signal wire from the throttle position sensor is not shorted to battery voltage or to the supply
- 3Check that the connectors at the throttle unit and the ECM are tight and clean
- 4If the fault comes back, have a workshop check the earth wire and the throttle unit
Symptomer du kan merke1
- Malfunction indicator lamp (check engine) comes on or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.