VOLVO
ECM-P061161 - Fuel Injector Control Module Performance. Algorithm Based Failures. Signal calculation failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM registers that the fuel injection has been limited, and the code is set when this happens with the engine running. The fault is a wrong calculation, and the cause may lie in the turbo control, the fuel control or the software.
Mulige årsaker
- Fault in the turbo control
- If ECM-P061162 is also stored: fault in the fuel control
- If ECM-P061164 is also stored: fault in the software
Hva du kan gjøre
- 1Any other fault codes in the ECM should be dealt with first
- 2Check that the hoses between the air flow meter and the turbo are intact and secure, and look for air leaks
- 3Check that the hoses between the turbo and the inlet pipe are intact and secure, and look for air leaks
- 4Look for clear fuel leaks in the fuel system
- 5If the fault comes back, have a workshop check the turbo control and the engine control module
Symptomer du kan merke4
- The car feels weak and lacks power, especially when pulling away from a standstill
- The engine hesitates, surges or runs roughly during acceleration or deceleration
- The engine hesitates, surges or runs roughly at constant speed
- The problems may be present all the time or only now and then
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.