VOLVO
ECM-P061164 - Fuel Injector Control Module Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The ECM has limited the fuel injection, and the code is set with the engine running when the module registers it. The fault concerns a signal that is not plausible, and the cause may be the software, the turbo control or the fuel control.
Mulige årsaker
- Fault in the software
- If ECM-P061161 is also stored: fault in the turbo control
- If ECM-P061162 is also stored: fault in the fuel control
Hva du kan gjøre
- 1First deal with any other fault codes in the ECM
- 2Check the hoses in the intake between the air flow meter and the turbo for cracks and loose clamps
- 3Check the hoses between the turbo and the inlet pipe for cracks and loose clamps
- 4Have a workshop reload the software in the ECM, and replace it if the fault remains
Symptomer du kan merke4
- The car feels weak and lacks power
- The engine hesitates, surges or runs roughly during acceleration or deceleration
- The engine hesitates, surges or runs roughly at constant speed
- The problems may be present all the time or only now and then
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.