VOLVO
ECM-P061500 - Starter Relay Circuit. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
10 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (12)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2008–2010Kun motor: D4204T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2008–2010Kun motor: D4204T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
- Volvo XC90 (2003–)2005–2011Kun motor: B8444S
Hva betyr feilkoden?
The ECM controls the signal to the starter relay coil, and the code is set when the signal from the starter relay is missing at engine start. The fault is a general one and does not state a more specific fault type.
Mulige årsaker
- Break in the signal wire
- Contact resistance or oxidation in the connections
- Damaged starter relay
Hva du kan gjøre
- 1Check the battery charge and that the battery terminals and earth connections are tight and clean
- 2If you have a multimeter: check that the signal wire to the starter relay has no break
- 3Check that the connectors at the starter relay and the ECM are tight and clean
- 4If the fault comes back, have a workshop check the starter relay and replace it if needed
Symptomer du kan merke2
- The starter motor does not turn
- The engine does not start, the starter motor does not crank and no clicking sound is heard when starting
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.