Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P061549
    VOLVO

    ECM-P061549 - Starter Relay Circuit. System Internal Failures. Internal electronic failure

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    7 modeller

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Vis modeller per årsmodell og motor (20)
    • Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
    • Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
    • Volvo S80 (2007–)2010Kun motor: B4204T6
    • Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
    • Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
    • Volvo S80 (2007–)2015Kun motor: B4164T
    • Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
    • Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
    • Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
    • Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
    • Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
    • Volvo V70 (2008–)2010Kun motor: B4204T6
    • Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
    • Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
    • Volvo XC60 (2009–)2010Kun motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Kun motor: B4204T7

    Hva betyr feilkoden?

    The ECM uses an output stage to control components, and the code is set when an internal fault arises in that output stage during a start attempt. The fault lies in the module itself.

    Mulige årsaker

    • Damaged ECM

    Hva du kan gjøre

    1. 1Check the battery charge and that the battery terminals and earth connections are tight and clean
    2. 2Check that the connectors at the ECM are tight and free from corrosion
    3. 3This fault is repaired by replacing the engine control module, so have a workshop do this if the code comes back

    Symptomer du kan merke2

    • The engine does not start, either always or only sometimes
    • The engine is hard to start or cranks slowly, either always or only sometimes

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.