VOLVO
ECM-P061715 - Starter Relay Circuit High. General Electrical Failures. Circuit short to battery or open
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (23)
- Volvo S60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo S60 (2011–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S80 (2007–)2015Kun motor: D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Kun motor: D5204T4, D5204T6
- Volvo V40 (2013–)2015Kun motor: D5204T6
- Volvo V40 Cross Country (2013–)2013–2014Kun motor: D5204T4, D5204T6
- Volvo V40 Cross Country (2013–)2015Kun motor: D5204T6
- Volvo V60 (2011–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo V60 (2011–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D82PHEV
- Volvo V60 (2011–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23, D82PHEV, D87PHEV
- Volvo V70 (2008–)2012Kun motor: D5204T3, D5244T11, D5244T15
- Volvo V70 (2008–)2013Kun motor: D5204T3, D5204T7, D5244T11, D5244T15, D5244T17
- Volvo V70 (2008–)2014–2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2012Kun motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013Alle motorer unntatt: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC60 (2009–)2014Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17
- Volvo XC60 (2009–)2015Kun motor: D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2012–2013Alle motorer unntatt: B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2014–2015Kun motor: D5204T3, D5244T11, D5244T12, D5244T15, D5244T17
Hva betyr feilkoden?
The engine control module checks the LS line that drives the starter motor through the start relay when the engine is started. The fault is set when the signal cable has contact with voltage or is broken, so the signal does not match what the control module expects. The engine may have difficulty starting, and automatic start/stop may stop working.
Mulige årsaker
- The signal cable is short-circuited to voltage
- Open circuit in the signal cable
Hva du kan gjøre
- 1Check that the fuses for the starting system are intact
- 2With the ignition on, check the connectors at the start relay and the control module for loose connections, oxidation and contact resistance
- 3With the ignition on and using a multimeter, check that the signal cable is intact, meaning not broken, and has no contact with battery voltage
- 4Look for chafed wiring along the route between the control module and the start relay
- 5If the wiring is intact and the connectors are good but the fault remains: have a workshop check the start relay and the control module
Symptomer du kan merke3
- The engine does not start, sometimes or all the time
- Automatic start/stop of the engine does not work while driving
- Automatic start/stop of the engine does not work at idle
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.