VOLVO
ECM-P061B01 - Internal Control Module Torque Calculation Performance. General Failure Information. General electrical failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Vis modeller per årsmodell og motor (3)
Hva betyr feilkoden?
The engine control module constantly compares the signal from the crankshaft impulse sensor with a calculated value while the engine runs. The fault is set when the signal during the comparison does not agree with the calculated value. According to the cause of the fault code, the engine control module itself is damaged.
Mulige årsaker
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1If you have a diagnostic tool: run the built-in self-test for this code in the engine control and read the current status when it has finished
- 2Check whether the fault is still active once the test has been carried out
- 3If the fault remains: have a workshop replace the engine control module
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.