VOLVO
ECM-P061C47 - Internal Control Module Engine RPM Performance. System Internal Failures. Watchdog / safety µC failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
7 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)
Vis modeller per årsmodell og motor (20)
- Volvo S60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo S60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2010Kun motor: B4204T6
- Volvo S80 (2007–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo S80 (2007–)2012–2014Kun motor: B4164T, B4164T2, B4204T6, B4204T7
- Volvo S80 (2007–)2015Kun motor: B4164T
- Volvo V40 (2013–)2013Kun motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Kun motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: B4164T
- Volvo V60 (2011–)2011Kun motor: B4164T, B4164T3, B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Kun motor: B4164T, B4164T2, B4164T3, B4204T7
- Volvo V60 (2011–)2015Kun motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2010Kun motor: B4204T6
- Volvo V70 (2008–)2011Kun motor: B4164T, B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Kun motor: B4164T, B4164T2, B4204T7
- Volvo V70 (2008–)2015Kun motor: B4164T, B4164T2
- Volvo XC60 (2009–)2010Kun motor: B4204T6
- Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Kun motor: B4204T7
Hva betyr feilkoden?
Although the fault code is named as a safety fault in the processor, the condition is that the engine control module's internal monitoring has registered faulty speed monitoring. The causes are mainly the impulse sensor and the camshaft sensor with their wiring, or the control module itself. Engine output may be limited while the fault is active.
Mulige årsaker
- Poor contact (raised contact resistance) or a break in the wiring to the impulse sensor
- Raised contact resistance or a break in the wiring to the camshaft sensor
- Damaged impulse sensor or damaged camshaft sensor
- Internal fault or damage in the engine control module (ECM)
Hva du kan gjøre
- 1Check that the fuses are intact
- 2With the ignition on, check the connectors at the impulse sensor and the camshaft sensor for contact resistance and oxidation
- 3Look for chafed or broken wiring to the impulse sensor and the camshaft sensor
- 4After the repair: read the diagnostic status and fault status with a diagnostic tool. The fault should be gone once the diagnosis is complete
- 5If the fault remains: have a workshop read the engine control module with diagnostic equipment
Symptomer du kan merke4
- The engine lacks power
- The engine hesitates, surges or runs jerkily, sometimes or all the time
- The check engine lamp lights or behaves abnormally
- Text message and warning symbol in the display
Hva feilen kan påvirke1
- Engine output is limited
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.