Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P061C48
    VOLVO

    ECM-P061C48 - Internal Control Module Engine RPM Performance. System Internal Failures. Supervision software failure

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)

    Vis modeller per årsmodell og motor (12)
    • Volvo S60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo S60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo S80 (2007–)2010Kun motor: B4204T6
    • Volvo S80 (2007–)2011–2014Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2011Kun motor: B4204T6, B4204T7
    • Volvo V60 (2011–)2012–2014Kun motor: B4204T7
    • Volvo V70 (2008–)2010Kun motor: B4204T6
    • Volvo V70 (2008–)2011Kun motor: B4204T6, B4204T7
    • Volvo V70 (2008–)2012–2014Kun motor: B4204T7
    • Volvo XC60 (2009–)2010Kun motor: B4204T6
    • Volvo XC60 (2009–)2011–2012Kun motor: B4204T6, B4204T7
    • Volvo XC60 (2009–)2013–2015Kun motor: B4204T7

    Hva betyr feilkoden?

    The transmission control module (TCM) can ask for a higher engine speed before a downshift, and the request is sent to the engine control module over the CAN network. The code concerns the engine control module not allowing the increase for some reason, for example when the speed is too low. The fault can be noticed during gear changes.

    Mulige årsaker

    • No specific cause is stated for this code

    Hva du kan gjøre

    1. 1Check whether the transmission and engine control modules have the latest software, and have a workshop update them if needed
    2. 2Check whether there are fault codes in the transmission control module (TCM) and remedy them first
    3. 3If you have a diagnostic tool: read the diagnostic status and fault status after the repair, and check that the fault is no longer active once the diagnosis is complete
    4. 4Have a workshop with diagnostic equipment decide whether any of the control modules is damaged, and replace it if needed

    Symptomer du kan merke3

    • The automatic transmission shifts harshly or jerkily, sometimes or all the time
    • Gear changes happen too early, too late or too often, sometimes or all the time
    • Gear changes take too long to complete, sometimes or all the time

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.