VOLVO
ECM-P061D00 - Internal Control Module Engine Air Mass Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
The engine control module has registered a fault showing that the load signal calculated by the normal engine functions is lower than what the internal monitoring calculates. It can be a knock-on code caused by dirt in the throttle unit or by objects that have got into the intake passages. Those should be dealt with first.
Mulige årsaker
- Dirt or contaminants in the throttle unit
- Foreign objects in the intake passages
- Damaged engine control module (ECM)
Hva du kan gjøre
- 1Look into the intake passages for foreign objects, and check the throttle unit for contamination. Remedy these first
- 2If you have a diagnostic tool: read the status of the code after the repair
- 3If the fault remains: have a workshop read the control module with diagnostic equipment and decide whether it needs replacing
Symptomer du kan merke4
- The maximum engine speed is too low
- The cruise control does not work at all
- Uneven idle
- The environmental lamp lights
Hva feilen kan påvirke1
- Engine speed and torque are limited to a calculated reasonable value
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.