VOLVO
ECM-P061E00 - Internal Control Module Brake Signal Performance. General Failure Information. No sub type information
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Feilkoden har ulik betydning avhengig av modell, årsmodell eller motor. Velg betydningen som gjelder din bil.
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (9)
- Volvo S80 (2007–)2007Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2008–2009Kun motor: D4204T, D5244T4, D5244T5
- Volvo S80 (2007–)2010Kun motor: D4204T
- Volvo V70 (2008–)2008–2009Kun motor: D4204T, D5244T4, D5244T5
- Volvo V70 (2008–)2010Kun motor: D4204T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module receives information from the forward sensing module (FSM) over the CAN network, and the FSM asks for engine braking when needed. The fault is set when such a request stays active longer than allowed, or when communication with the brake control module (BCM) is disturbed or missing. The code can only be cleared once the root fault has been remedied.
Mulige årsaker
- Contact resistance, oxidation or open circuit in connections
- Fault in the controller area network (CAN)
- Damaged forward sensing module (FSM)
- Open circuit in one of the CAN wires, or a short circuit between the CAN wires
- Fault in the brake control module (BCM)
Hva du kan gjøre
- 1With the ignition on, you can read the diagnostic status and fault status and see whether the fault is still present
- 2Use a multimeter to check that the CAN wires have no break and are not short-circuited to each other
- 3Check the connectors at the forward sensing module (FSM) and in the CAN connectors for looseness and oxidation
- 4Fault tracing in the brake control module (BCM) should be done by a workshop. Do not work on the braking system's control module yourself
- 5Remedy the root fault first and then clear the code, since it cannot be cleared until the root fault is remedied
Symptomer du kan merke1
- The cruise control will not engage
Hva feilen kan påvirke1
- The cruise control switches off while the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.