VOLVO
ECM-P061E87 - Collision Mitigation By Braking. Bus Signal / Message Failures. Alive / sequence counter incorrect / not updated
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
3 modellerS60 (2011–), S80 (2007–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo S60 (2011–)2011–2012Kun motor: B5254T5
- Volvo S80 (2007–)2007–2008Kun motor: B5254T6
- Volvo S80 (2007–)2009Kun motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Kun motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Kun motor: B5254T10
- Volvo V70 (2008–)2008Kun motor: B5254T6
- Volvo V70 (2008–)2009Kun motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Kun motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Kun motor: B5254T10
Hva betyr feilkoden?
When there is a collision risk, the engine control module provides brake support using signals from the forward sensing module (FSM). The fault is set when the central electronic module (CEM) does not allow the engine torque to be lowered. The code is set first in the CEM or FSM and then in the engine control module, and it can only be cleared once the root fault has been remedied.
Mulige årsaker
- Fault in the forward sensing module (FSM)
- Fault in the central electronic module (CEM)
Hva du kan gjøre
- 1There is no separate fault tracing for this code. Start by tracing the control module where the fault was first registered, either the FSM or the CEM
- 2The code can only be cleared once the root fault is remedied and its own code is cleared, so deal with the root fault first
- 3If you have a diagnostic tool: read the fault status in the FSM and the CEM and see which one is active
- 4If the fault remains after the repair: have a workshop handle the fault tracing in the CEM and FSM
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.