VOLVO
ECM-P062B04 - Internal Control Module Fuel Injector Control Performance. General Failure Information. System Internal Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)
Vis modeller per årsmodell og motor (9)
- Volvo C30 (2007–2013)2011–2013Kun motor: D4162T
- Volvo S40 (2004–2013)2011–2012Kun motor: D4162T
- Volvo S60 (2011–)2011–2015Kun motor: D4162T
- Volvo S80 (2007–)2012–2015Kun motor: D4162T
- Volvo V40 (2013–)2013–2015Kun motor: D4162T
- Volvo V40 Cross Country (2013–)2013–2015Kun motor: D4162T
- Volvo V50 (2004–2013)2011–2012Kun motor: D4162T
- Volvo V60 (2011–)2011–2015Kun motor: D4162T
- Volvo V70 (2008–)2012–2015Kun motor: D4162T
Hva betyr feilkoden?
The engine control module checks the injector circuit while the injection is taking place. The fault code is set when the module detects a fault in the signal to the injectors, which can be caused by a short circuit in the circuit or by a damaged control module.
Mulige årsaker
- Damaged engine control module (ECM)
- Short circuit in the circuit for the injectors
Hva du kan gjøre
- 1If you have a diagnostic tool: run the built-in self-test for this code and check that the fault is inactive afterwards
- 2With a multimeter, check that the wires to the injectors are not short-circuited
- 3If the fault remains: have a workshop check or replace the engine control module
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.