VOLVO
ECM-P062B84 - Internal Control Module Fuel Injector Control Performance. Bus Signal / Message Failures. Signal below allowable range
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module monitors the exhaust gas temperature. The fault code is set when the engine control module detects that the signal is faulty, and in this case the signal is below the permitted range. The code is linked to ECM-P062B85, which concerns the signal above the permitted range.
Mulige årsaker
- The same signal fault as ECM-P062B85 refers to
- Damaged temperature sensor
- Contact resistance or oxidation in connections
Hva du kan gjøre
- 1Check that the fuses are intact
- 2With the ignition off, check the connectors at the temperature sensor for contact resistance and oxidation
- 3If you have a diagnostic tool: read the status of the code after the repair and see whether it has cleared
- 4Have a workshop check the temperature sensor and its wiring if the fault remains
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.