VOLVO
ECM-P062B85 - Internal Control Module Fuel Injector Control Performance. Bus Signal / Message Failures. Signal above allowable range
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module monitors the exhaust gas temperature and detects a signal that is faulty, in this case above the permitted range. The code is linked to ECM-P062B84, which concerns the signal below the permitted range. The fault can be due to a damaged temperature sensor or poor contact at the sensor.
Mulige årsaker
- Damaged temperature sensor
- Contact resistance or oxidation in the connections
Hva du kan gjøre
- 1Check that the relevant fuses are intact
- 2Check the connector at the temperature sensor for looseness, oxidation and contact resistance
- 3If you have a diagnostic tool: read the exhaust temperature in live data with the engine cold and then warm, and see whether it changes smoothly
- 4Have a workshop check the temperature sensor and its wiring if the fault remains
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.