VOLVO
ECM-P062B92 - Internal Control Module Fuel Injector Control Performance. Component Failures. Performance or incorrect operation
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (6)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module checks the amount of fuel injected against what was requested, and counts how often the difference goes beyond an upper or lower limit value. The code is set once a limit has been crossed too many times. The fault should be traced together with the other fuel system fault codes.
Mulige årsaker
- Trace according to the other fault codes for the fuel system
Hva du kan gjøre
- 1There is no separate fault tracing for this code. Start with the fuel system fault codes
- 2If you have a diagnostic tool: read the status of the code with the ignition on and see whether it is active
- 3Remedy the fuel system fault codes first, then check whether this code is still present
Symptomer du kan merke1
- No noticeable symptoms for the driver
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.