VOLVO
ECM-P062D02 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. General signal failure
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
8 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Vis modeller per årsmodell og motor (8)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Kun motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
Hva betyr feilkoden?
The engine control module checks the injector nozzles and the internal clock of the driver stage. The fault code is set when the module finds the signal to be wrong. The fault therefore concerns the control module's own check of injection, and it can make the check engine lamp light or behave abnormally.
Mulige årsaker
- Internal fault in the control module
Hva du kan gjøre
- 1With the ignition on, read the diagnostic status and fault status for the code
- 2Check that the fuses are intact
- 3Have a workshop read and remedy the fault code with diagnostic equipment, since the cause lies in the control module
Symptomer du kan merke1
- The check engine lamp lights or behaves abnormally
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.