VOLVO
ECM-P062D04 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. System Internal Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
9 modellerS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (16)
- Volvo S60 (2011–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo S80 (2007–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2015Kun motor: B4204T11
- Volvo V40 Cross Country (2013–)2015Kun motor: B4204T11
- Volvo V60 (2011–)2014–2015Kun motor: B4204T11, B4204T12, B4204T15, B4204T9
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC60 (2009–)2014–2015Kun motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC70 (2008–)2014–2015Kun motor: B4204T11
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module has built-in control systems that detect internal faults. If the monitoring registers a temporary fault in the injectors' control system, the fault code is set, and with an active fault the fuel supply is shut off. The fault can cause the engine not to start or to lack power.
Mulige årsaker
- Signal interference
- System voltage too low
- Damaged injection valves
- Software error
- Communication problems
- Internal fault in the control module
Hva du kan gjøre
- 1With the ignition on, read the diagnostic status and fault status for the code
- 2Check that the fuses are intact
- 3After the test, see whether the fault is still present
- 4Have a workshop check that the control module's software is up to date
- 5If the fault remains: have a workshop check the injection valves and the control module with diagnostic equipment
Symptomer du kan merke4
- The engine does not start, sometimes or all the time
- The engine lacks power
- The engine stalls on starting
- The check engine lamp lights or behaves abnormally
Hva feilen kan påvirke1
- Fuel supply is shut off while the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.