VOLVO
ECM-P062D05 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. System Programming Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module has built-in control systems that detect internal faults. When the monitoring registers a temporary fault in the injectors' control system, the fault code is set, and with an active fault the fuel supply is shut off. The code relates to the programming of the control module and may be connected to its software.
Mulige årsaker
- Signal interference
- Damaged injection valves
- Software error
- Fault codes stored at the same time: ECM-P062D06, ECM-P062D92 or ECM-P062D94
Hva du kan gjøre
- 1Have a workshop check whether the latest engine control software is loaded in the car
- 2Check that the fuses are intact
- 3If you have a diagnostic tool: read the code's status after the repair and see whether it is still active
- 4If the fault remains: have a workshop correct the programming or replace the control module
Symptomer du kan merke3
- The engine does not start, sometimes or all the time
- The engine lacks power, especially when pulling away from standstill
- The engine stalls on starting
Hva feilen kan påvirke1
- The fuel supply is shut off while the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.