VOLVO
ECM-P062D06 - Fuel Injector Driver Circuit Performance Bank 1. General Failure Information. Algorithm Based Failures
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module has built-in control systems for detecting internal faults. The fault code is set when the monitoring registers a temporary fault in the injectors' control system, and fuel is shut off with an active fault. The fault lies in the control module's calculations and is linked to other injection fault codes.
Mulige årsaker
- Signal interference
- Damaged injection valves
- Software error
- Fault codes stored at the same time: ECM-P062D05, ECM-P062D92 or ECM-P062D94
Hva du kan gjøre
- 1With the ignition on, read the diagnostic status and fault status for the code
- 2Check whether the fault is still active
- 3Check that the fuses are intact
- 4If the fault remains: have a workshop check the engine control and its software
Symptomer du kan merke3
- The engine does not start, sometimes or all the time
- The engine lacks power
- The starter motor does not turn over on starting, and a clicking sound may be heard
Hva feilen kan påvirke1
- The fuel supply is shut off while the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.