Hopp til innhold
    OBD Tuning
    SEND TIL OSS
    SEND TIL OSS
    Hjem
    Feilkoder
    VOLVO
    ECM-P062D48
    VOLVO

    ECM-P062D48 - Fuel Injector Driver Circuit Performance Bank 1. System Internal Failures. Supervision software failure

    System

    Motorstyring (ECM)

    Volvo-modeller feilkoden gjelder for

    Gjelder følgende modeller:

    5 modeller

    S80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)

    Vis modeller per årsmodell og motor (8)
    • Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
    • Volvo S80 (2007–)2010–2011Kun motor: D4164T
    • Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
    • Volvo V70 (2008–)2010–2011Kun motor: D4164T
    • Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
    • Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
    • Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
    • Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5

    Hva betyr feilkoden?

    The engine control module has built-in control systems that detect internal faults. The monitoring in the control module picks up temporary problems in the injector control, and the fault code is then set. The code concerns the control module's supervision software and may be linked to other injection fault codes.

    Mulige årsaker

    • Signal interference
    • System voltage too low
    • Damaged injection valves
    • Software error
    • Communication problems
    • Fault codes stored at the same time: ECM-P062D49, ECM-P062D04 or ECM-P062D86

    Hva du kan gjøre

    1. 1Have a workshop check that the engine control has the latest software available
    2. 2Check that the fuses are intact
    3. 3With the ignition on: read the diagnostic status and fault status for the code and see whether the fault is still active
    4. 4Remedy as needed: if the fault remains, have a workshop correct the software or check the control module

    Symptomer du kan merke4

    • The engine does not start, sometimes or all the time
    • The engine lacks power
    • The engine stalls on starting
    • The starter motor does not turn over, but a clicking sound may be heard on starting attempts

    Hva feilen kan påvirke1

    • Fuel supply is shut off while the fault is active

    Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.

    OBD Tuning

    Sveriges ledende ekspertsenter for bilelektronikk. Vi tilbyr profesjonell ECU-tuning, reparasjon av styreenheter og diagnostikk med 12 måneders garanti.

    Tjenester

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    Database & Diagnostikk

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    ECU-produsenter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Selskap

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    • Motoroptimalisering
    • ECU Reparasjon
    • Modulkloning
    • Instrumentpanel
    • SRS / Airbag
    • Startsperre

    • ECU-database
    • DTC Feilkodekatalog
    • Diagnoseguider & Måleverdier
    • AI Feilkodeanalysator
    • Nyheter

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Om oss
    • Kontakt
    • Verkstedpartnere
    • Fraktguide
    • Garanti
    • FAQ
    • Vilkår
    • Personvern
    • Nettstedskart

    Besøk oss

    Gjuterigatan 29, Karlstad

    Ring oss

    054-830 480

    E-post oss

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle rettigheter forbeholdt.