VOLVO
ECM-P062D94 - Fuel Injector Driver Circuit Performance Bank 1. Component Failures. Unexpected operation
System
Motorstyring (ECM)
Volvo-modeller feilkoden gjelder for
Gjelder følgende modeller:
5 modellerS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Vis modeller per årsmodell og motor (8)
- Volvo S80 (2007–)2007–2009Kun motor: D5244T4, D5244T5
- Volvo S80 (2007–)2010–2011Kun motor: D4164T
- Volvo V70 (2008–)2008–2009Kun motor: D5244T4, D5244T5
- Volvo V70 (2008–)2010–2011Kun motor: D4164T
- Volvo XC60 (2009–)2009Alle motorer unntatt: B6304T2
- Volvo XC70 (2008–)2008Alle motorer unntatt: B6324S
- Volvo XC70 (2008–)2009Kun motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Kun motor: D5244T18, D5244T5
Hva betyr feilkoden?
The engine control module monitors the injector control with built-in control systems. The fault code is set when the internal monitoring functions detect a temporary problem in the injector control, and the unexpected behaviour in the injector control gives the fault.
Mulige årsaker
- Fault codes stored at the same time: ECM-P062D06 or ECM-P062D92
- Signal interference
- Damaged injection valves
- Software error
Hva du kan gjøre
- 1With the ignition on, read the diagnostic status and fault status for the code and check whether it is active
- 2Check that the fuses are intact
- 3Have a workshop check the injection valves, since they are among the possible causes of the fault
- 4Remedy the root fault and see whether the code returns
Symptomer du kan merke4
- The engine does not start, sometimes or all the time
- The engine lacks power, especially when pulling away from standstill
- The engine stalls on starting
- The starter motor cranks but the engine does not start
Hva feilen kan påvirke1
- Fuel supply is shut off while the fault is active
Generell veiledning for bileiere. Feilsøking på bilen kan peke på en annen årsak.